A buyer does not buy a material because it has a good story. I have had to remind myself of that repeatedly.
Birch plywood is a good example. Finnish birch plywood has been used in European design and manufacturing for decades, and established producers already offer familiar sheet formats such as 1,250 × 2,500 mm and 1,220 × 2,440 mm.
So when we began developing plywood from white birch grown in Hokkaido, Japan, we knew we were not introducing birch plywood to a market that had never seen it before.
We were asking a harder question:
Why would a buyer change?
The answer could not simply be that our material was Japanese.
A good material is only the beginning
At Takizawa Veneer, we developed plywood using locally sourced Hokkaido birch, including thinned trees. The material has a clean appearance, with a cross-section attractive enough to be exposed rather than hidden.
It had a good story: local forest resources, distinctive wood and a different origin from the birch plywood already familiar to European buyers.
Then we had to sell it.
That meant dealing with the things that rarely appear in a material sample: specifications, price, lead time, minimum quantities and logistics.
This is where we encountered what I now think of as commercial friction.
The size problem
One of the first problems was the sheet size.
Our factory could not produce the formats that many overseas designers already knew. Our standard sheet was 910 × 1,820 mm.
We decided not to hide that limitation or promise something we could not manufacture. Instead, we asked designers to work with the sheet we actually made.
There was an unexpected connection here.
The 910 × 1,820 mm dimension is close to a traditional Japanese tatami proportion. Tatami are the woven floor mats traditionally used in Japanese rooms, and their dimensions have long been based on regional Japanese standards, although actual sizes vary by region.
So our sheet was not simply “smaller plywood.” It reflected a dimension familiar within Japanese architecture and manufacturing.
The question changed from “Can you make the standard European size?”
to:
“What can we design within ours?”
That became important in Paris.
We saw it in Paris
In March 2026, Paris-based design studio and consultancy ANF Work, led by the French-Japanese duo Timothée Kaplan and Ayumi Yoshida, worked with designer Luka Yasukawa and Takizawa Veneer on a new edition of Pedestal Furniture, presented at MATTER and SHAPE in Paris.
The furniture used our Hokkaido birch plywood and was finished with kaki-shibu, a traditional Japanese treatment made from fermented persimmon juice.
From the beginning, the pieces were designed around our 910 × 1,820 mm sheet.
That meant the material’s dimensions were part of the design rather than a limitation discovered after the fact.
You can see the birch. You can see the layers. The plywood itself helps define the structure of the furniture.
The material was no longer a sample. It had become an armchair and a stool.
The response extended beyond the exhibition itself. On the day the press release was published, we received two inquiries: one from a well-known New York-based furniture designer with tens of thousands of social media followers, and another from an emerging furniture design studio in Indonesia. Before the Paris presentation, neither connection seemed likely. Online meetings followed the next week, with ANF Work joining the discussions. One of these conversations has since progressed to active product development, with a possible launch next year. The product is being developed as a co-branded collaboration, with both companies’ names represented — a shift from supplying material to helping shape the finished product.
We did not ship the whole solution
The plywood was manufactured at our factory in Hokkaido. The kaki-shibu treatment was also carried out in Japan.
But we did not want to manufacture and ship fully assembled furniture halfway around the world if we could avoid it.
So logistics became part of the design.
The components were designed to be shipped to France and assembled there without specialist skills. Manufacturing and finishing stayed in Japan; final assembly moved closer to the customer.
Based on shipping quotes, the flat-pack approach was estimated to reduce shipping volume to around 30 percent of that required for fully assembled furniture, while lowering shipping costs by approximately 70 percent. These are estimates based on the quotes we received, rather than measured post-shipment savings.
This was not just a logistics decision. It was a product-design decision.
We were learning that a supply chain cannot always be added after a product has been designed. Sometimes the product has to be designed with the supply chain in mind.
We did not try to force the supply chain to fit the product. We designed the product around the supply chain.
What happens before the order
This is also why I founded UpLift+ (pronounced “UpLift Plus”).
My role is to connect what a factory can make with what a designer wants to make and what a customer can realistically buy.
The finished chair gets photographed. The conversations about sheet sizes, production, finishing, shipping and assembly usually do not.
But those conversations determine whether the material ever gets ordered.
That has changed the way I think about sustainable design.
We often focus on what makes a material better: sourcing, renewable resources, recycled content or local production. All of those things matter. But eventually someone has to place an order.
The material has to fit the product, the budget and the schedule. The specification has to be clear. And when the customer wants more, there has to be a credible answer.
That is procurement.
It is not particularly glamorous, but it is where sustainability meets reality.
When I see a new material today, I ask a different question.
Not only, “Is this better?”
But:
“What happens next?”
The Hokkaido birch project gave us a practical answer. We did not need to make the material more exotic. We needed to be honest about its limitations, design around them and make the path from factory to finished product workable.
The future of sustainable design will not be decided only by who develops the better material.
It will also be decided by who can remove the friction between “This is beautiful” and “Yes, we can buy it.”
That is where materials become products.
And products become business.
Get the latest insights, trends, and innovations to help position yourself at the forefront of sustainable business leadership—delivered straight to your inbox.
Published Nov 18, 2026 8am EST / 5am PST / 1pm GMT / 2pm CET